More Info
POWER DISTRIBUTION PANELS
Switches have a built-in red indicator light and are designed for use in exposed marine applications. Splash proof fuseholders with 10 Amp fuses provide overcurrent protection.
WATERPROOF SWITCH PANELS
These high quality enclosures are designed for rugged environments such as military, off-highway, heavy truck, construction, or marine applications. They simplify installation by reducing labor and providing a central location for operation and/or troubleshooting.
More Info
Enclosure Assemblies
Rack Mount Panels are designed for control, monitoring, and protection of AC and DC electrical loads. These panels are specifically designed for mounting onto Electronic Industries Association (EIA) compliant 19" racks accommodating preferred 482.60 mm standard panel widths and the modular unit "U" height of 44.45 mm.
More Info
RACK MOUNT PANELS
OEM customers rely on our Design, Engineering, and Manufacturing expertise to deliver custom panels, systems, and assemblies that are technically superior, quality built, and can be trusted to perform reliably.
More Info
Custom OEM
Paneltronics designs and manufactures custom Power Distribution Units for numerous applications and across multiple industries. Quality, custom PDU's can be configured and designed for your specific application.
More Info
PDU
Your panel is obviously an important part of a healthy home wiring. If you’re not for sure if your panel is safe you need to have a licensed electrician come and take a look at it. Here are three Panel brands that will most likely need an upgrade.
The breaker panel (or electrical service panel) is where all of your home’s breakers are located. Each of these breakers is designed to flip on and off. If a circuit in your house gets overloaded the breaker connected to that circuit will flip. For instance, if you have a space heater and a vacuum cleaner on the same outlet it might be too much power going through that circuit; so that the outlet doesn’t burn up your breaker will flip to protect your home.
We don’t see many of these panels. But at one point they were a very popular brand. These panels would allow wires to heat up and melt causing quite a few problems. If you have one of these panels you’ll definitely want to get it replaced.
Sylvania panels were produced by Zinsco, and they have many of the same problems with overheating the wires. Because of this, these panels are considered very unsafe, and many insurance companies will NOT insure your home until you get a panel upgrade.
Probably the most notorious of all bad panels is the Federal Pacific. We see these panels all the time; they cause real problems and can cause fires in homes. If you have one of these panels, you’ll want to get it replaced ASAP.
If you need a panel upgrade our licensed electricians can safely remove and replace your panel. They can also do an inspection on your panel if you’re just unsure about its age or safety. We can perform maintenance on your panel even if you don’t need a full replacement.