TTF Power manufactures and supplies formed wire products and accessories for power transmission and distribution systems. Our formed wire products are made of wires and strands that have been previously been preset during manufacture into the helical structure that they take in the completed rope. A greatly preformed rope reduces internal stresses, eases rope handling and gives more distribution of load on the wires and strands.
Formed wire is also known as preformed wire, helical or shaped wire. They are used in the overhead transmission lines to protect the conductors from abrasion and corrosion caused by the strong winds.
They run smoother and uniformly, give greater flexibility and gives longer service life in bending. The preformed wires can be in categorized according to the area of application which includes transmission, distribution, substation and fiber utility.
Send Inquiry Now
Distribution tie is used as an alternative for armor rods as it has a tie wire and encased with an insulator. A distribution tie is installed with a pad when used on the naked conductor. Its main purpose is to offer protection against abrasion due to the constant movement of the conductor. They are made from aluminum steel to help secure the conductors to the top groove of the interchangeable insulators.
This type of preformed wire is designed to create a tight grip on the conductor. The grip prevents distortion of the conductor from external forces as the grip is uniform. The design provides the required holding strength that will support the continuation of the conductors. It is easy to install as it has a simple design. It is highly recommended for stay termination on wood pole construction.
These formed wires play a protective role on the transmission lines as they shield the conductors from the effects of bending, abrasion and compression. They are easy to install and they are marked with a different color from the rest of the formed wires.
This is a formed wire that is used for clamping conductors along the longitudinal axis. The arms of the clamp are extended outwards on the opposite side of the conductor. The sections of the conductors are rested on the arms where the cable is free to oscillate within the given arms.
The line guard is designed to protect the conductor by reducing the bending which in return minimizes the effects of corrosion and abrasion on the conductors. The protection provided by the line guard depends on the environmental factors, temperature and tensional forces that are exerted on the conductor.
The sole purpose of the spiral vibration damper is to reduce vibrations on the conductors. This helps reduce the stress that is caused by the vibrations of the conductors. The installation can either be single installation or double installation. They are used with other conductors to handle the different power capacities. It is non corrosive and can withstand high temperatures.
This type of formed wire is used to join two or more conductors so that they end up forming a strong mechanical bond at the point of their union. The joining also forms an electrical termination point such that the electric current cannot flow beyond that point. The conductors can be welded or soldered at the splice in order to enhance their bond.
Suspension and support are those product designed to reduce the static and dynamic stresses at the support point which makes the conductor protected against the effects of the oscillations caused by the strong winds. These include:
Aluminum suspension clamp — this is intended for use on all aluminum-based conductors. The armor rods are placed on over the conductors at suspension points to minimize the static and dynamic stresses at the ends of the clamps. They are have an aluminum alloy body, galvanized steel hardware keeper and a stainless steel cotter pin.
Cushion grip suspension — they are intended for use on all aluminum based conductors and are designed to reduce the static and dynamic stresses at the support point. The conductor is cushioned by field proven, integral elastomer inserts which guard against abrasion, wear and fatigue.
End sleeves — these are used to ensure the proper application of guy grip dead ends and big grip dead ends.
They are made from galvanized steel and are compatible with guy grip dead ends and big grip dead ends.
They are designed for galvanized bridge strand and aluminum-clad steel cables.
Tension dead end — this is a dielectric dead end designed to terminate short span, low tension ADSS fiber optic cables in low voltage environments. It is a single layer component that offers an economical solution for very light loads.
Dielectric suspension — this is specifically designed for installation on ADSS cables and is different than suspension OPGW.
They have a double layer of rods that offer critical protection against tearing of the plastic jacket during unbalanced longitudinal loading of the cable while providing substantial holding strength.
It uses a combination of structural reinforcing rods to reduce compression clamping and bending stresses on the cable and glass fibers.
The double layer of rods offers critical protection against tearing of the plastic jacket during unbalanced longitudinal loading of the cable while providing substantial holding strength.
Dielectric dead end — the dead end component is required to transfer axial tensile loads and distribute radial compressive forces through the plastic jacket and onto the internal strength members without damaging the fragile plastic jacket or internal optical fibers.
The fittings and grounding accessories can be included in the same container with the suspension.
They offer limited tension, medium tension and high tension dead ends.
ADSS corona coil — these are designed to reduce electrical stress at the ends of the metal rods of dielectric dead ends and suspensions applied on ADSS cables installed in high voltage electrical fields.
They are made from light material that help during the swinging of the cables caused by strong winds.
A formed wire is a helical shaped wire which is made using a wire spool. It can transform to almost any form depending on the application, often including sets of various lengths and sizes.
There are seven common types of preformed wire:
If your company is searching for ways to be more productive, consider organizing your storeroom and storing parts within welded wire baskets and collapsible wire mesh containers. It’s the fastest and most cost-effective way to instantly impact your ability to manage inventory, eliminate product waste and help your team work safer and more efficiently. Collapsible wire containers from Cherry’s Material Handling offer an economical and effective way to get the most out of your storage and supply space, while at the same time improving everything from organization and workflow to facility safety and cleanliness.
Collapsible welded wire mesh containers are among the most popular storage products in the industry because of the many advantages they provide over traditional alternatives.
Our bulk wire storage containers are a superior option when compared to other traditional alternatives, such as cardboard boxes, bags and plastic bins. The lightweight but strong material creates an ideal low weight-to-load ratio, meaning you can move more stock with less wire containers. Thanks to the spacing of the mesh design, contents are clearly visible — even when stacked three and four containers high — making it easy to see what is stored inside.
Wire containers from Cherry's Material Handling stack, fold and store items to increase floor space and workplace safety. Standard sizes are always in stock, while customizable sizing options and features give you the power to choose the container that’s best suited for your inventory or work environment.
From product fulfillment and distribution to general warehousing and batch picking, these exceptionally strong, foldable storage bins can be effectively utilized in countless different industries. Units come available in junior, medium, large, extra large or custom sizes, feature capacities up to 4,000 lbs and can be assembled or disassembled in a matter of moments.
Additional benefits of our wire mesh containers include:
Have a unique application or inventory that requires something other than a standard-size storage solution? Cherry’s Material Handling can fabricate and design wire collapsible containers of most sizes with lower costs than using steel or plastic. Our experienced team will help analyze your needs to choose the wire gauge, mesh pattern and other attributes needed to safely and effectively manage your inventory. Additional options available include:
If you need a custom, collapsible wire container, contact Cherry's Material Handling to work on a solution that meets your needs.
Whether you’re focused on better utilizing your warehouse space, organizing your distribution center or finding new ways to improve operational efficiency, Cherry’s Material Handling can help. We not only offer you an impressive inventory of quality products for the warehousing industry but also back it up with expert guidance to help your business overcome its most challenging supply, storage, workflow and distribution problems.
We’re a leading material handling distributor offering one of the best selections of storage container solutions for a wide variety of industries. We set ourselves apart from the competition by delivering collapsible containers capable of helping you optimize warehouse workflow and better utilize your storage facility.
When you choose to partner with Cherry’s Material Handling, you benefit from:
We’re a leading material handling distributor offering one of the best selections of storage container solutions for a wide variety of industries. We set ourselves apart from the competition by delivering collapsible containers capable of helping you optimize warehouse workflow and better utilize your storage facility.
In addition to standard-size and custom wire containers, Cherry’s Material Handling also carries wire container casters and container lids to improve the safety and versatility of your operation.
From competitive prices and quick delivery to personalized customer service and support, we’re the trusted source for all your needs. Get in touch by giving us a call at 877-350-2729 or contact us by filling out our online form.
For more information on this see our related resources: