WIRE / BAR STRAIGHTENING AND CUTTING

 

STEEL WIRE STRAIGHTENING AND CUTTING MACHINE RG10-16 Series

This model of straightening and cutting equipment is designed for the production of rebar Ø10-16 mm according to the "coil to rod" pattern.

Technical Advantages

• Suitable for straightening and cutting cold-rolled round bar/ ribbed bar, hot-rolled round/ ribbed bar.
• High cutting accuracy: length tolerance ≤±1 mm.
• High straightness: ≤2 mm/m.
• 4 working speeds: 70 m/min, 100 m/min, 130 m/min and 150 m/min.
• Normally working speed: 130 m/min. If you finish product length less than 2 m, suggest 70 - 100 m/min.
• Intelligent control: the machine is controlled by PLC Siemens, touch screen Weinview and servo motor EURA Drives servo. Easy operation and working reliable.
• Low failure rate: due to the fine processing of parts and strict quality control, after installation and debugging, under normal working conditions, it can maintain trouble-free operation for a long time.
• World Advanced & Leading technology: machine straightening and cutting technology.

Technical Data

ModelRG10-16RG10-16SSteel Wire DiameterØ10 - 16 mm cold rolled & hot rolled round bar/ rebarWire Length0.6 - 12 m, adjustable or customizedRebar Collect Stacker12 mLength Tolerance≤±1 mmStraightness≤2 mm/mWorking Speed70 - 100 - 130 m/minLoad capacity of Pay-off3000 kgStraightening ModeRotating Straightening DrumWire Feeding ModeElectric MotorTotal Motor Power45+7.5 kW55+7.5 kWCutting ModeServo Motor CuttingServo Motor Power7.5 kWControl ModePLC (Siemens)Steel Wire StrengthTensile Strength ≤550 MPa Low Carbon Steel WireElectric VoltageThree Phase, 380V, 50HzPower Supply LineCross-sectional Area 6 mm2, Material: Copper MaterialAir consumptionWorking Pressure 0.6 MPa, Flow Rate 18 m3/h (0.3 m3/min)Working Line Size (L×W×H)30×3×2 mGross Weight5500 kg5800 kg

REBAR STRAIGHTENING AND CUTTING LINE RG5-12 Series

This rebar straightening and cutting machine is designed for the production of reinforcing bars Ø5-12 mm according to the "coil-to-rod" pattern.

Technical Data

ModelRG5-12Rebar diameterØ5 - 12 mmCut-off Length0.8 - 12 m (сould customized according to client’s requirements)Rebar Collect Stacker12 mLength accuracy≤±2 mmLength adjust modeManual / AutomaticPulling speed120 - 150 m/minLoad capacity of Pay-off3000 kgCutting ModeServo ShearControl ModePCC (Programmable Computer Controller)Speed Controlsteplessly adjustableTensile strength of materialσb = 210 - 650 MPaElectric VoltageThree Phase, 380V, 50HzTotal power46.5 kWDimension (L×W×H)2.6×1×1.98 mGross Weight3000 kg

WIRE / BAR STRAIGHTENING AND CUTTING MACHINE

This Wire/Bar Straightening and Cutting Machine utilizes the principle that the wire will be straightened while rotating at high speed and being drawn at the same time.

Wire Straightener and Cutter consists of two units of straightening roller and Set length & Cutter Seat. Metal is moved by a feeding roller, straightened by a straightening roller, and taken into the Set-Length & Cutter-Seat by Outlet Feeding Roller.

The set length & Cutter Seat consist of Thread Stripper and Cutting Arm. When Metal wire is taken into inlet feeding roller and revolve the straightening roller, a Counter will count and rule the cutting length. After cutting, the cutting rod makes the Thread Stripper move and the finished product falls into the collector.

WIRE / BAR STRAIGHTENING AND CUTTING MACHINE RGC-S SERIES

WIRE / BAR STRAIGHTENING AND CUTTING MACHINE RGC-S12WIRE / BAR STRAIGHTENING AND CUTTING MACHINE RGC-S30WIRE / BAR STRAIGHTENING AND CUTTING MACHINE RGC-S25

Specification of Wire straightening and cutting Machine RGC-S Series

ModelWire DiameterWire Cut LengthSpeedPower RequiredRGC-S9Ø5 - Ø91m – 12m80 m/min30HP/5HP/5HPRGC-S12Ø8 - Ø121m – 12m120 m/min40HP/15HP/7-1/2HPRGC-S20Ø12 – Ø161m – 12m80/56/38/24 m/min50HP/10HPRGC-S25Ø16 – Ø251m – 12m23 m/min50HP/10HP/25HPRGC-S30Ø20 – Ø301m – 12m15 m/min60HP/15HP/40HP/1HP(7X)

WIRE /BAR STRAIGHTENING AND CUTTING MACHINE RG-K SERIES

Wire / Bar Straightening and Cutting Machines are designed for straightening-measuring-cutting any kinds of metal wire/bar or non-metal wire/bar such as, steel bar for construction, welding rods, netting - wire, fan netting hanger, refrigerator netting, shopping basket, shoes rack, book stand, domestic fowls cage, record stand and the other kinds of steel wire etc.

The Wire/Bar Straightener and Cutter is easy to operate. You just need to fix the adjuster to the desired length, and feed the wire/bar into the machine. Then, the machine automatically produces straight wire/bar of uniformed length at a high speed.

Moreover, it rotates smoothly and noiselessly; it is precise in its measure and strong in its structure. During the operation, the feeding of wire/bar and the cutting action are ceaselessly continued by the shifting of a cutter cooperatively.

RG-K Series Wire straightening and cutting Machine Specifications

ModelRequired PowerWire diameterSpeedCut wire lengthRG-K-11HP+1/2HPØ1.5mm~Ø3.5mm35m/min6 feetRG-K-21HP+2HPØ3mm~Ø6mm35 m/min6 feetRG-K-310HPØ5mm~Ø8mm35 m/min10 FeetRG-K-42HP+20HPØ7mm~Ø12mm35 m/min20 feetRG-K-52HP+20HP+3HPØ10mm~Ø15mm11m/min, 22 m/min, 34 m/min, 49 m/min20 feet

Hydraulic bending tools

ModelBending AngleCurving AbilityWeightНВВ-320~90°32 mm19 kgНВВ-250~90°32 mm11.5 kg

Wire/rebar cutter RGT16Wire/rebar cutter RGT20Wire/rebar cutter RGT32

SpecificationsModelElectric VoltageElectric CurrentCutting CapacityCutting speedCutting ForceWeightSize (L × W × H)RGT16110V / 220V, 50/60Hz9A / 4.5AØ4 ~ Ø16 mm1.5 sec10 t7 kg340 × 107 × 236 mmRGT2011A / 5.5AØ4 ~ Ø20 mm3 sec15 t13.5 kg416 × 116 × 220 mmRGT3214A / 7AØ20 ~ Ø32 mm (standard cutter blades)
Ø4 ~ Ø20 mm (larger cutter blades)6 sec55 t46 kg580 × 190 × 300 mm

Hydraulic cutting tools with rechargeable batteries

SpecificationsModelCutting abilityWeightCutting speedНСС-1313 mm4 kg2.5 secНСС-1616 mm4.5 kgНСС-1919 mm5 kg

Hydraulic cutting tools

SpecificationsModelCutting abilityWeightCutting speedНВС-30113 mm5.3 kg1.5 secНВС-31616 mm7.8 kgНВС-1919 mm11.8 kgНВС-2525 mm20 kgНВС-3232 mm